Clik here to view.
How It Works: Automatic Client Approval in Configuration Manager 2007
Purpose:This post is intended to explain how client approval works when a Mixed Mode Configuration Manager 2007 site is configured to automatically approve clients in trusted domains and to offer...
View ArticleClik here to view.
Solution: ConfigMgr2007 SP2 Setup stuck in Upgrade status
I recently ran into this issue a couple days ago and didn't see a whole lot documented on it so I thought I would do a quick write up here. If you're trying to upgrade some of your site servers to...
View ArticleClik here to view.
Solution: When using USMT 4 in an SCCM 2007 SP2 OSD Task Sequence, files are...
When running a SCCM 2007 SP2 Task Sequence with a "Capture User State" task that utilizes USMT 4, files are properly captured and restored but settings may not be. The SMSTS.log will not show any...
View ArticleClik here to view.
Announcing the Release of Configuration Manager 2007 SuperFlows!!
The Configuration Manager writing team is very excited to announce the release of the following Configuration Manager 2007 SuperFlows:Software Updates Synchronization SuperFlow: Provides the detailed...
View ArticleClik here to view.
Configuration Manager AD system discovery will not work across external...
After upgrading to SCCM 2007 SP2, AD discovery methods will fail to bind across external trusts. When the failure occurs, the ADSysDis.log will contain entries similar to this:ERROR: Failed to bind to...
View ArticleClik here to view.
Error when trying to integrating MDT with ConfigMgr 2007
I see this issue every once in a while and thought it might make for a good tip. If you're running into errors trying to integrate MDT and ConfigMgr 2007 then this one's for you. IssueWhen trying to...
View ArticleClik here to view.
When deploying Windows Server 2008 SP2 64-bit as a Software Update via...
When attempting to deploy Windows Server 2008 x64 SP2 (KB948465) as a Software Update via System Center Configuration Manager, the update may not be offered as applicable to some Windows Server 2008...
View ArticleClik here to view.
Troubleshooting empty program lists in a Configuration Manager 2007 Task...
When attempting to add an Install Software item in a System Center Configuration Manager 2007 Task Sequence, the Program drop-down list under Install a single application may be empty. Clicking Apply...
View ArticleClik here to view.
Troubleshooting the PXE Service Point and WDS in Configuration Manager 2007
Note: There is an updated version of this guide over at the Configuration Manager OSD Support Team Blog. For the latest version, please visit the below article:Troubleshooting the PXE Service Point and...
View ArticleClik here to view.
ConfigMgr 2007 fix: Task Sequences with a large number of steps fail to run...
I have had a couple of cases recently that involve running a task sequence from the Run Advertised Program (RAP) Control Panel applet which has a large number of software package installation steps...
View ArticleKB: Client piloting package fails after site expansion in Configuration Manager
Consider the following scenario: You’re running Configuration Manager current branch, version 1511 through 1606, or version 1610 LTSB. Your old primary site was being used for client piloting. You...
View ArticleUpdate 1612 for the Tech Preview Branch of Microsoft System Center...
We are happy to announce that that update 1612 for the Technical Preview Branch of Microsoft System Center Configuration Manager has been released. Technical Preview Branch releases give you an...
View ArticleSummary of changes in Microsoft System Center Configuration Manager current...
Version 1610 of System Center Configuration Manager Current Branch (ConfigMgr 1610) contains many changes that are intended to prevent issues and improve features. A list of these changes and fixes is...
View ArticleKB: Software Metering Agent fails with "Software Metering failed to start...
After you install the Convenience rollup update for Windows 7 SP1 and Windows Server 2008 R2 SP1 (3125574) and the System Center Configuration Manager client, the Software Metering Agent fails, and the...
View ArticleNow Available: Interoperability update for Microsoft System Center...
An update is available to address important upgrade-related issues for System Center Configuration Manager current branch, version 1610. The issues described in the article below apply only to sites...
View ArticleSupport Tip: The Apply Driver Package task fails when the ADK is upgraded to...
You may find that after installing the Microsoft ADK 10 1607 on System Center Configuration Manager Current Branch 1602 (or later), the Apply Driver Package task will start failing when installing one...
View ArticleTroubleshooting Configuration Manager and WSUS software update...
If you’re having synchronization problems with either WSUS or System Center Configuration Manager, here’s a friendly reminder that we have a great troubleshooter that will walk you through diagnosing...
View ArticleClik here to view.
Support Tip: Running TestDBUpgrade does not complete and logs “Failed to...
~ Rafid Ali Hello Everyone, Rafid Ali here with another Configuration Manager support tip for you. I recently came across a scenario where a TestDbUpgrade was failing due to a custom database table...
View ArticleMicrosoft System Center Configuration Manager now supports macOS Sierra...
We are proud to announce that the current branch of Microsoft System Center Configuration Manager (version 1610) now supports macOS Sierra (version 10.12) with version 5.0.8466.1 or later of the...
View ArticleConfigMgr 2012 SP1/R2 RTM: Support for Hybrid Mobile Device Management Ending...
Applies to: Microsoft Intune, System Center 2012 Configuration Manager SP1, System Center 2012 R2 Configuration Manager Support for System Center 2012 Configuration Manager SP1 and System Center 2012...
View Article